Front membranes - 美卡诺元器件（上海）有限公司

The front membrane is the visual and tactile interface between your membrane keypad and the user.
It can be labelled and surface finished using a number of different printing and embossing methods.

Product Information

For tactile Key delineation
	caP embossing	Cap embossing is a cap-shaped projection. This form of embossing is used for instal- lation of lEDs, enabling levelling out of component height and intensifi cation of the illumination effect.
	raised embossing	raised embossing can be executed in various forms.

embossing
	rim embossing	rim embossing is applied as a guide for the fi ngers. The surface level of the front membrane and key surface remain the same.
	dome embossing	Dome embossing is possible in diameters ranging from 8 to 17 mm.
	ProFiline embossing	This especially high embossing is the basis of our Profi line keypads.

Printing methods
screen Printing	Industrial screen printing forms the basis for the production of all types of membrane keypads.	We work under cleanroom conditions using the latest, highly specialised equipment in the form of multiple pro- duction lines which print your design motifs onto the membrane flexibly and with no sacrifices in quality. a high level of scratch-proofing is as- sured, since the membranes are printed on the rear side.
digital Printing	Digital-printing technology is espe- cially suitable for prototypes, short production series and for individual, customer-specific motifs.	High-quality photos and graphics;Various colour gradients and graphics possible;Fast and flexible;For short runs and individual printing;Prototypes, e.g. exhibition and trade fair samples.
high-gloss technology	Our high-gloss technology is a special surface design treatment.	Here, a high-gloss membrane is par- tially printed using a special textured lacquer and is delustered in the process. This produces a luxurious and high-quality design. High-gloss tech- nology is a rational-cost alternative to doming.

Back

Front membranes

发布时间：2021-05-25

阅读量：4466次

For tactile Key delineation
	caP embossing	Cap embossing is a cap-shaped projection. This form of embossing is used for instal- lation of lEDs, enabling levelling out of component height and intensifi cation of the illumination effect.
	raised embossing	raised embossing can be executed in various forms.

embossing
	rim embossing	rim embossing is applied as a guide for the fi ngers. The surface level of the front membrane and key surface remain the same.
	dome embossing	Dome embossing is possible in diameters ranging from 8 to 17 mm.
	ProFiline embossing	This especially high embossing is the basis of our Profi line keypads.

上一篇：membrane KeyPads

下一篇：无

返回列表